Millitary trainning for Our sales team

Millitary trainning for Our sales team

Our sales team have a millitary trainning to exploit their potential characters. They put on the millitary uniforms like as the soliders , they are very excited because they haven’t dressed the millitary uniforms.They did some exercises as being divided into several groups. they have worked together to finish the virtual missions through their close cooperation. they sweat to get the coats wetting and got tiresomed a lot, but the more hard exercises they experience, the more steady charaters they can pull out .

/by

ABERY take part in the sales competition with 88 companies

ABERY take part in the sales competition with 88 companies

ABERY sales team takes part in the sales competition with 88 companies from NOV. our fighters are very excited for this compaign, they not just fight for the more orders, but also for the more passion to approach during work. it is most essence to get them enjoying the sales work, if you love sales, you will become a outstanding sales, if not, you will loose your passion and energey when you encounter some barriers.

/by

Happy beach trip for our sales team

Happy beach trip for our sales team

Last weekend our sales team visit a resort area which locates nearby beach with landscape. We did play a exciting game of which we divided into several groups and each one group sought for another groups with the screaming voices and laugh echoing at the beach. After that, we went back to hotel and took part in a out-door cooking at the yard. the delicious smells come out of many meals and foods which attract our children a lot. On the morning of second day, We took a finishing boat around the island on which many white egrets dwell on. The fresh sea water is very clean, the breeze blow onto our faces, both of them keep us very relaxing. some of small sea fish jump out of the water when our boat come across them. our children got exciting when they see it.

/by

ABERY colleagues take a trip for tourism in Qingyuan

ABERY colleagues take a trip for tourism in Qingyuan

For relaxing and resting a lot after hard works, We went to QINGYUAN for a 2-day tourism last weekend. We took a bus from our factory in the morning. our colleagues were very excited for this trip, they sang and chatted a lot on the way . After checked in, they climbed a hill and took boats floating down through torrents of the river pouring down  from the hill, which was very funny and adventurous. After that, they went to enjoy the hot springs  with lot pleasure and entertainments there for few hours at night. Second day They went into the forest field to anticipate the game on which they wore military uniforms and took imitation guns to play the fighting game. they think this sort of game is astonished and amazing which they think they seem to be the soldiers to fight for their faiths no matter how hard the battle would be.

/by

Mark from Egypt gave us a exiciting speech

Mark from Egypt gave us a exiciting speech

Yesterday we had a amazing speech hosted by Mark who come from Egype. His speech is very deep insight in tacts and professial extention on the content. He said: THINK OUTSIDE THE BOX ! this concept is very new for us. We think it is very usful for us.  The more you think beyond your knowings, the more you can get from that. If you think in normal way or typical manner,  you will get nothing but few good results. Only if you think differently, you will get more than you expect.

/by

Company Activity Photos

After a busy job, our company usually organizes employees to go out for a trip, here are some pictures of our trip.

/by

Plastic Injection Molded Parts Quality Control 100% Inspection

ABERY, a professional plastic injection molding company with rich experience, attaches great importance to quality control for injection molds and plastic molded parts.

The characteristics of precision injection molding is: the size of the injection molded parts with high precision, small tolerance.

precision injection molding
precision injection molding

To achieve the requirements of precision injection conditions must be met:

(1) the mold material is better, rigid, cavity dimension precision and template between positioning accuracy is higher, lower surface roughness.

(2) to adopt precision plastic molding machine.

(3) to adopt precision molding process.

(4) to choose suitable for precision injection molding process of the material. Commonly used precision molding materials have several: POM, POM = CF (carbon fiber), PNM = GF (glass fiber), PA \ FRPA66 (enhanced PA), PC, etc.

Precision injection process can ensure the size ,that molding is the important way to control the shrinkage of injection molded parts, including: thermal contraction, disguised contraction of molded parts, orientation and compressed contraction and elastic recovery.

Common injection molding features not high than precision injection molding, the size of injection molded parts are typically can be assembled into standard, requirements for the appearance of the injection molded parts is relatively high, if necessary, may use the second processing (oil, for example) to improve the appearance of defects. Ordinary injection molding don’t need to use special precision injection molding machine, also do not need to specially designated materials, general common thermoplastics can be used to production. So ordinary injection molding technology is widely used in modern plastic industry.

Precision injection molding process

In the process of precision injection molding, the raw material is pre- loaded into the box.
Automatic feeding (in the form of particles) to the injection molding machine hopper.
Melt the raw material in the barrel and inject the mold under high pressure.
The molten polymer is allowed to cool and solidify, and is removed from the mold.
If necessary, used water to clean, dry with a hair dryer. Then they are shipped for packing inspection.

Medical supplies and equipment for precision semiconductors as well as data storage, consumer electronics, medical and automotive industries in the production of precision injection molding of other high precision plastic parts.

Various tonnage of automatic precision injection molding machine (from 80 to 650 tons), our products meet the customer’s strict size, functional and aesthetic requirements.
We also provide medical products, the formation of non dust production plant, clean the packaging of various products, molding parts without pollution risk.

SELECT A GOOD PRECISION INJECTION MOLDING MACHINE
To buy a high precision injection molding machine, the impact of injection molding machine selection factors include the following:
1 die size (length * width * height), weight, special design
2 kinds of plastics (pure or many kinds of plastics)
3 injection product size (L, W, H, thickness), weight and so on.
4 molding requirements: such as quality conditions, production speed, etc….
According to the above information, you can choose the machine that suits you.
First, select the type of product and plastic material
Second, the mold can be placed on the machine, to determine the size of the tie, the height of the mold, the minimum size of the mold is appropriate.
Third, you can take out the product.
Switch trip is more than two times the height of the opening and closing of the product.
The jet’s journey is enough to spray the product.
Fourth, the clamping tonnage is determined by the plastic materials and products.
Fifth, the weight of the injection depends on the weight of the product and the mold cavity.
Sixth. Injection speed: thin-walled products always require high injection speed.

Compared with the traditional technology, Cn-moulding has higher precision injection molding and more perfect performance, which is often supplied to electronic information engineering, medical devices, packeging, cars, machinery, hardware, apparatus，timepiece industry, weapons and aerospace, etc. Therefore, it will become a revolution between parts molding and processing.

/by

Plastic Injection Molded Parts Quality Control 100% Inspection

100% plastic Injection molded parts quality inspection methods
In China,Whether produced after injection products meet quality standards, must be tested, a common quality test methods are the following few ways.

injection molded plastic in china
injection molded parts inspection in china

full inspection
It was called full inspection is individually tested for injection products, we have talked about “full” refers to the number of all the plastic parts produced, rather than the entire value of the quality characteristics tested. In determining the test items,Test costs are generally low, the implementation of all product inspection is to have a higher quality requirements.

Such as plastic parts Dimensions test is easier and can be fully tested, and the requirements of the position and some plastic parts crucial, a great impact on the quality, but also the need for full inspection. Not plastic parts for each test must be carried out in full, as it cost too much time-consuming and laborious. Usually occurs when the following conditions using full inspection.

1) found that more unqualified plastic parts, plastic parts or the whole batch are unqualified, the need for follow-up products for full inspection.

High single value

2) injection products, even when a scrap will bring great losses.

3) If the product quality problems, give people life safety or safety hazard when great.

Injection molded plastic sampling inspection
The so-called sampling inspection,, is from a group of randomly selected plastic part of the test conducted. By this test section of plastic parts extracted to make the evaluation of quality of these plastic parts. Compared with the full inspection sampling inspection, it tested a small number of plastic parts, low-cost test, test speed. Sampling inspection and batch size of the number of samples, volume, sample quantity; small quantities, less sampling; as long as the appropriate number of samples, the test results have a high accuracy. Usually by random checks in the following cases.

1) Some of the Injection molded plastic parts that mechanical and physical properties need to destructive testing, this will bring damage to the plastic parts.

2) more than the mass production of plastic parts, plastic parts produced quantity particularly large, want to save test time and test costs.

3) the production of raw materials in Injection molded plastic parts, there are a lot of raw material is powdered, granular or liquid form, the raw material for these multi-use sampling. Compared with the full inspection sampling inspection, although there are a small number of test and low test cost advantages, but also the following problems: First, when the second installment of the plastic parts, even after sample testing has been considered qualified, can not believe that this batch of plastic parts plant each plastic parts are qualified, which may also exist a very small amount of non-conforming product. Second, the sample tests will inevitably appear judgmental errors, this is the vast majority of qualified products, due to sampling bias, but judged unqualified; or could have been substandard goods, has become qualified. Therefore, in order to determine the probability of error is controlled within a reasonable range, often need to coordinate the use of mathematical statistics methods.

In short, the full inspection and sampling test has its own characteristics, and applications and problems also vary, depending on the circumstances test methods should be chosen to adapt. Mostly due to the injection mold products for mass production, it is more to take sample tests

Machine Inspectioninjection molding molded plastics inspect
Parts are initially inspected directly out of our molding machine. Our engineers are trained to identify and rectify the following defects:

Sink marks that form when the outer plastic shell hardens before the internal plastic has had an opportunity to cool
Short shots caused when there is an inadequate amount of plastic material to fill the mold
Burn marks caused by trapped compressed air during the molding process
Flash marks, which is the excess plastic that extends from the end of the molded part.

/by